We have talked about whychoosing proper 3PL logistics servicesand atrucking company with a modern warehouse management system(WMS) for shipping and receiving and warehousing is crucial to any successful supply chain management process.
Within the supply chain process, there is a much smaller piece of the puzzle that is arguably the most critical component in maintaining accurate inventory:
The Inbound and Outbound Logistics Process. That is, Shipping and Receiving!
If inventory is not initially received and reported accurately during the inbound processes (ex. by the company’s Receiving Department), it becomes nearly impossible to maintain an accurate system or record. This affects all aspects of logistics services and the supply chain.
Also, if the outbound shipping process does not operate correctly, shipments may be incomplete, arrive late, or sent to the wrong recipient.
For this reason, you should figure outhow to choose a logistics and trucking companythat focuses a great deal of attention to the inbound and outbound process. To ensure that this process runs as smoothly as possible, at BR Williams (a3PLlogistics company serving the USA and Canada), we use a top-of-the-linewarehouse management system (WMS) with real-time logistics services capabilities.
Inbound & Outbound Logistics Process (Step-by-Step Guide)
To figure out the difference between inbound and outbound logistics, it’s important to first know thebasics of an inbound and outbound process. That will help you better understand how it affects the efficiency of your overall supply chain. Let’s take a look at shipping and receiving and inbound logistics vs outbound logistics (and pay attention to areas your business can improve in).
The Inbound Process:
1. Recording and Receipts
Recording and receipts drive the inbound process. Receipts help supply chain professionals ensure that each step in the process is completed and communicated with accuracy. Basic receipts include item, quantity, unit of measurement, and other required information.
Elements that should be tracked throughout the inbound process include: lot numbers, manufacturing dates, expiration dates, serial numbers, P.O. tracking, various inventory receipt statuses, default receipt status rules, emergency re-direction, routing of times to special staging on “short” inventories, immediate availability of items for backorders andcross-docks, and more.
Pre-receipt notification is among the newer and exciting logistics services in use by supply chain companies(likeBR Williams). This service speeds up the inbound process by reducing the amount of information entered manually. The pre-receipt process allows for automation, real time receiving and put away functions, reduction of receiving errors, and minimizes cost.
2. Load Arrival
Your receiving process should startimmediatelyafter pre-receipts have been loaded into the WMS system.
However, with a highly functional WMS system (like the one BR Williams utilizes), product is more than simply received. Within minutes, the system can make receipt/load appointments in advance, or reserve docks, doors, and staging areas.
This preliminary inbound planning helpssupply chain management companiesbecome more efficient when completing eachlogistics service.All receipt information should be already entered with minimal human error. Due to this, when a receipt/load arrives, the warehouse coordinator knows exactly which dock door to direct the truck, and then can easily assign an unload staging area.
3. Receiving Real-Time Information
The “receipt” is handed to coordinators, already “bar-coded” with specific instructions for an associate who can begin the receiving activities and real-time reporting.
Checking processes as you go ensures that the inbound process continues to run smoothly. Automated systems used by your logistics and trucking companies should ensure that warehouse associates are at the correct dock door and are unloading the correct shipment based on information from the bar-coded receiver.
Once the inbound receipt and load arrival process is completed warehouse associates begin detailed receiving. Types of receiving are different for each supply chain and trucking company.
BR Williams does detail receiving in two ways:
- One-Step Receiving: When customers benefit from eliminating the staging and have their products sent directly to storage
- Two-Step Receiving: When the receipt/load needs to be staged instead of putting directly into storage
4. License Plate Tracking
Having control over your moving product is just as important as having control during storage and warehousing.Trucking companiesknow this, and have started allowing for their license plate numbers to be tracked through WMS systems.
This is an important step in managing the entire inbound process, and will become necessary in December, 2017 whenELD compliancebecomes mandatory.
5. Put-Away and Receipt Close
In older systems, once the product was received, it was stocked only by professionals. This is still true today in certain cases. However, new systems provide for other options and automation.
For example, BR Williams’ WMS system specifically allows customer configured settings that help determine whether your product will be put-away using an operator-dictated or system-directed method.
The final step for logistics and trucking companies involved in the inbound process is updating in real time that the trailer or carrier has been emptied.
This is when real-time capabilities allow for review and exceptions.
The process speeds up when receipts and other information can be sent in real-time.It also allows for docks to be immediately labeled “available” for other receipts/lead shipments.
The Outbound Process:
1. Order Entry, Adds, Changes, and Deletions
When the inbound process is handled correctly, it allows for an easier outbound process.
Order entry is similar to the pre-receipt process in the inbound process.The first steps of an outbound system is to validate orders, check for errors or duplications, and handle exceptions immediately.
Up to the point that line items are loaded onto an outbound trailer, customers should have the ability to add, change, or delete specific items or entire orders.
Making these logistics services available to customers is the number one reason why real-time reporting is crucial to the outbound process.
2. Replenishment and Product Picking
Replenishment is essentially planning for future deliveries by establishing pick pre-requisite requirements and scheduling logistics services and activities to be completed before the corresponding pick tasks.
This step allows for your supply chain to continuously operate with minimal manual planning and strategy between steps.
The picking process can be simple or very complex. Your picking process should be unique due to the nature of different businesses, industries, and clients.
Choose logistics andtrucking companiesthat allow for tailored picking capabilities and strategies.
Picking strategies may include:
- Line picking
- Cluster picking
- Batch picking
- Zone picking
- Label-based picking
- Paper-based picking
3. Packing, Staging, Checking, and Loading
Packing is arguably the most important logistics services involved in the outbound process. It includes packing items, inspecting, labeling, routing and manifesting outbound orders per specific customer requirements.
If this step isn’t managed flawlessly, completed shipments and arrival times can be compromised and the reputation of the business will be at stake.
Staging locations should already be decided if an automated system is involved. While going through the process of staging, checking and loading each step should be recorded in real-time thorough WMS for accuracy and timeliness.
Once all shipments are loaded and ready to go, a warehouse coordinator should be automatically updated, and a warehouse associate should be directed to load your order onto a trailer.
4. Shipping and Document Generation
The last step to a successful outbound process is shipping the product to its final arrival place and creating a log of the process for your records.
This is another important reason to use trucking companies, such as https://www.a1autotransport.com/freight/, who utilize a WMS. You will also need to engage a customs agent, such as Mobius Customs, to ensure that all of your documentation is correct and any issues are addressed. If every step has been recorded throughout the process, the final reporting is essentially already complete.
The Shipping and Receiving Key
If you are considering using alogisticsortrucking company, ensure that you are hiring a transport consultancy company that can meet your specific needs in an efficient, highly functional way that is reported to you online and in real-time.
BR Williams proudly uses one of the most powerfulshipping and receiving and warehouse management systemsin the industry so that clients havereal time accessto the most critical data required to deliver the right product to the right place at the right time.
Our capabilities in shipping and receiving provide the most options, provide unique and personal solutions, real-time updates and control, as well as an ability to improve our client’s inbound and outbound process.